These custom built Custom Mazda A-Arms will fit all years between 1986-1994. Complete with both upper and lower A-Arms. THE LOWERS NOW COME PLATED (1/4" bag plate), for the bag to be mounted on. No other lower bag mounts are neccessary. Average turnaround time of 1-4 weeks. These babys will allow more travel, for those of you that drive a body drop truck or roll on HUGE wheels, you know how a few more inches of lift, would make all the difference. We use S10 Upper & Lower Ball joints to allow more travel than the stock ball joint. We only supply the upper, since your Dropspindles come with S10 ball joints.
Ok finally CanDo has designed these Mazda A-arms to do what you expect them too. Lay on the Big wheels and still get enough lift to raise it up and be able to turn. Since the only drop spindels available for Mazdas come with a lower S10 ball joint we desided to go with the S10 upper ball joint. This requires the top balljoint hole in your spindle to be re-taper to fit the S10 ball joint. It can be reamed by most any machine shop